Articles
-
TIPS AND MORE ABOUT FABRICATING GLASS – #3 TEMPERING – HEATING AND COOLING
3 common Tempering mistakes that are easily fixed on “Heavy Glass” = White line (SKUNK TAIL), Blown Corners/ edge pitting (HEAT SHOCK), Crack from Hinge Cut-Out (SHARP EDGES). First up is the dreaded “SKUNK TAIL”. Usually makes its appearance at the change of seasons when dynamics in the heating...Read more -
The Assembles of chillers in glass tempering furnace and their working principles
The composition of chillers in the glass tempering furnace: the chillers are composed of several chiller assemblies, each consisting of a number of small air boxes and an air distribution box, connected to be an integrated device through the chiller frame. How the chiller in the glass tempering f...Read more -
Glass Tempering: Issues and Concerns
Typical problems occurring during the heating process Heating is the most typical stage of glass tempering; a lot depend on this stage to bring out the product of high standard. Quality of tempered glass is very much influenced by Typical problems occurring during the heating proces...Read more -
What do power consumption, installed power and installed capacity of a glass tempering furnace mean?
Power consumption of the glass tempering furnace refers to the amount of electric energy consumed in the process of tempering certain quantity of glass. The measuring unit commonly used is the kilowatt hour (KWh). And the quantity of glass depends on the table size of the glass tempering furnace...Read more -
Tips on tempering screen printed glass
a. To protect the screen printed surface, the screen printed surface should be placed facing up when you feed the screen printed glass into the glass tempering furnace. b. Make sure the screen printed glass is dry before tempering; c. The screen printed glass may bend, which can be solved by adju...Read more