조항

  • Top Flat Glass Manufacturers in year of 2020

    Top Flat Glass Manufacturers in year of 2020

    TOP PLAYERS OF FLAT GLASS INDUSTRY IN THE WORLD FOR 2020   Ranking by number of float lines per company Company Number of float lines in 2021 AGC (Asahi Glass Company) More than 30 float lines Saint Gobain NSG Group 20 to 30 float lines Guardian Ki bing (China) Xinyi ...
    자세히보기
  • Tips for replacing the fused silica rollers (ceramic rollers) from glass tempering furnaces?

    Tips for replacing the fused silica rollers (ceramic rollers) from glass tempering furnaces?

    Tips on how to uninstall and install the fused silica rollers (ceramic rollers) onto glass tempering furnaces? 1. Shut down the furnace firstly. The uninstallation job for the ceramic rollers cannot be started until the furnace body is completely cool down.   2. To replace the ceramic rollers mu...
    자세히보기
  • Is it worth bringing in more digitalization in glass lamination?

    Is it worth bringing in more digitalization in glass lamination?

    As digitalization becomes a strategic discipline in almost all enterprises and industries, the glass processing business is no exception. So, if you’re wondering if it’s worth bringing in new capabilities through digitalization to some of your laminated glass processes, this article will help you...
    자세히보기
  • Top Glass Fabricators of North America in 2020

    Top Glass Fabricators of North America in 2020

    The challenging 2020 is over, but many hurdles remain in 2021. January data from the Bureau of Labor Statistics registered 140,000 nonfarm payroll jobs lost in December. Construction added 51,000 jobs in the same month, but remains 226,000 below its February level. Top Glass Fabricators reported ...
    자세히보기
  • Why to choose textured glass for covering on photovoltaic modules?

    Why to choose textured glass for covering on photovoltaic modules?

    The solar glass in the modules is specially textured to reduce reflections. The anti-reflective glass is said to increase module yields over those from conventional solar glass, particularly when the sun is low, as in the evening hours or winter months. Standard glass and polymer covers on photov...
    자세히보기
  • WHAT IS THE MOST IMPORTANT FEATURE FOR TRIPLE SILVER GLASS TEMPERING?

    WHAT IS THE MOST IMPORTANT FEATURE FOR TRIPLE SILVER GLASS TEMPERING?

    In my opinion it is that the convection air must be heated into the matrix configuration. The reason is, that the silver glass reflects almost 100% of the radiation. Only convection guarantees uniform glass temperature. At the same time as the convection is heated, the capacity is increased. Actu...
    자세히보기
  • Tips and More about Glass Fabrication

    Tips and More about Glass Fabrication

    Thanks for checking in today. Before we get started there are a couple of items that must be addressed. We give them a whole lot of lip service but is that all it is? We must live and breath these guys or all that follows will be vastly diminished and any improvement gained will not hold long ter...
    자세히보기
  • Effects of return air flow for convection heating

    Effects of return air flow for convection heating

    Modern convection technologies have been manufactured now over 20 years. The real very good convection system was developed kind of accidentally. It was using of famous  radiation heating furnace of Tamglass Engineering, HTF and adding high convection into that. The furnace was named “CONVAIR”, ...
    자세히보기
  • Does the shard size of tempered glass vary depending on the impact strength?

    Does the shard size of tempered glass vary depending on the impact strength?

    It is a very known behavior that the glass fragmentation depends on where you break the glass. This week, we’ve received the following question from Middle East: I have observed that when we break glass in the center with a lot of force, the fragments close to the point of impact are sometimes b...
    자세히보기
  • What causes the streaks (rope marks) in my shower glass?

    What causes the streaks (rope marks) in my shower glass?

    Question: My shower glass has the rope marks (streaks) in the glass running up and down. The issue shows up when the glass gets foggy after showering. What causes this effect? Answer: Most likely the effect is coming from the tempering process when glass in contact with kevlar cords in the quench...
    자세히보기
  • Debates and discussion on what to decide the good tempering furnaces and factors to produce the good quality of tempered glass.

    Debates and discussion on what to decide the good tempering furnaces and factors to produce the good quality of tempered glass.

    Debates and discussion on what to decide the good tempering furnaces and factors to produce the good quality of tempered glass. Mujash (Supply Chain Professional):  more interesting way to take forward if you ask specifics. pros and cons of each furnaces. – Glaston, EFCO, uniglass, quite a ...
    자세히보기
  • How to select glass sheet prior to the tempering process?

    How to select glass sheet prior to the tempering process?

    It is so important to select the qualified glass sheet before glass processing, i.e. tempering. Defective glass sheet may lead to quality issues and shattering during the process. Avoid using glass sheet containing stones. Especially in the tensile stress area, even tiny stones could become the c...
    자세히보기
12다음> >> 페이지 2분의 1